Description
Overview:
HSV-180AD digital AC servo drive is a high-voltage feed drive based on HSV-18D. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability.
HSV-180AD digital AC servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.
Features:
- High Performance AC digital servo drive
- Easy and flexible control (five control modes)
- Full state display
- Various interface and control modes
- Applicable to situations that requires high speed and high power
- Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system
Parameters:
Model Description of HSV-180AD servo drives
| Type | HSV-180AD
-035 |
HSV-180AD-050 | HSV-180AD-075 | |
| Maximum power of applicable Motor（KW） | 3.7KW | 5.5KW | 7.5KW | |
| Rated output current (A) | 12.5 | 16 | 23.5 | |
| Short-time Peak Current (A) | 22 | 28 | 42 | |
| Circute breaker（A） | 25 | 32 | 40 | |
| conector（A） | 18 | 25 | 32 | |
| Input exchange reactor | Current (A) | 10 | 15 | 20 |
| Inductance (mH) | 1.4 | 0.93 | 0.7 | |
| Input filter(A) | 10 | 15 | 20 | |
| Maximum braking resistor (A) | 25 | 25 | 40 | |
| Recommended
Braking resistor |
Resistor (Ω) | 51Ω | 51Ω | 27Ω |
| Power (W) | 1500W | 1500W | 2000W | |
| Quanlity | 1 | 1 | 1 | |
| Recomand value of main circute cable （mm2） | 4 | 4 | 4 | |
| Type | HSV-180AD-100 | HSV-180AD-150 | ||
| Maximum power of applicable Motor（KW） | 11KW | 15KW | ||
| Rated output current (A) | 32 | 47 | ||
| Short-time Peak Current (A) | 56 | 84 | ||
| Circute breaker（A） | 63 | 100 | ||
| conector（A） | 40 | 63 | ||
| Input exchange reactor | Current (A) | 30 | 50 | |
| Inductance (mH) | 0.47 | 0.28 | ||
| Input filter(A) | 30 | 50 | ||
| Maximum braking resistor (A) | 50 | 75 | ||
| Recommended
Braking resistor |
Resistor (Ω) | 33Ω | 27Ω | |
| Power (W) | 1500W | 2000W | ||
| Quanlity | 2 | 2 | ||
| Recomand value of main circute cable （mm2） | 10 | 16 | ||
| Type | HSV-180AD
-200 |
HSV-180AD-300 | HSV-180AD-450 | |
| Maximum power of applicable Motor（KW） | 30KW | 37KW | 51KW | |
| Rated output current (A) | 64.3 | 94 | 128 | |
| Short-time Peak Current (A) | 110 | 168 | 224 | |
| Circute breaker（A） | 125 | 200 | 400 | |
| conector（A） | 95 | 150 | 250 | |
| Input exchange reactor | Current (A) | 80 | 150 | 250 |
| Inductance (mH) | 0.17 | 0.095 | 0.056 | |
| Input filter(A) | 80 | 150 | 250 | |
| Maximum braking resistor (A) | 100 | 100 | 150 | |
| Recommended
Braking resistor |
Resistor (Ω) | 30Ω | 30Ω | 30Ω |
| Power (W) | 2500W | 2500W | 2500W | |
| Quanlity | 3 | 4 | 6 | |
| Recomand value of main circute cable （mm2） | 35 | 70 | 120 | |
Specifications
| Input power | Rated voltage、
Range of voltage fluctuation Frequency |
150A and below specifications：Three-phase AC380V -15%～+10% 50/60Hz
200A and above Specifications： 1.Single phase AC220V control power -15%～+10% 50/60Hz 2.Three-phase AC380V strong power -15%～+10% 50/60Hz |
| Control modes | Position control、External speed control、JOG control、Internal speed control | |
| Characteristic | Speed frequency response | 300Hz or higher |
| Speed volatility | Lower than±0.1 (load 0%～100%); Lower than±0.2(power supply
-15%～+10%) |
|
| Speed range | 1:10000 | |
| Position control | Types of pulse command | ① Direction + pulse train ②CCW pulse +CW pulse ③Two-phase A / B quadrature pulse |
| Form of pulse command | Non-insulated wire drive（about +5V） | |
| Frequency of pulse
command |
≤500kHz | |
| Speed
control |
Types of pulse command | ② Direction + pulse train ②CCW pulse +CW pulse ③Two-phase A / B quadrature pulse |
| Form of pulse command | Non-insulated wire drive（about +5V） | |
| Frequency of pulse
command |
≤500kHz | |
| Electron gear | 1≤α/β≤32767 | |
| Analog command | DC 0～+10VorDC -10V～+10V | |
| Acceleration and deceleration function | 1～32000ms
(0~1000r/min or 1000~0r/min) |
|
| Type of servo motor encoder | TTL composite incremental photoelectric encoder:1024line、2048line、2500 line、6000 line
|
|
| Servo encoder encoder type | Optical encoder (TTL)
Sine and cosine analog signal（1Vpp） |
|
| Input and output Signal |
Control input | Run enable
Alarm clear Forward and reverse running enable Servo orientation ready Control modes switch Indexing incremental orientation ratio input selection |
| Control output | Servo ready
Servo alarm Servo orientation-finished Speed-reached Zero-speed reached |
|
| Servo
function |
Servo orientation | Accuracy：±1pulse；Position adjustment：Parameter setting |
| Rigid tapping | Tapping deviation：±2％ | |
| Other function | C-axis control，Thread cutting | |
| Communication function | RS232 use MODBUS protocol | |
| Monitoring function | Speed
Flux current Torque current Motor load current Switch-value input status display Switch-value output status display Control mode display |
|
| Protecting function | Provides protection against:
Over speed Main power over-voltage and under-voltage Over current Overload Motor over heat Big speed error IPM fault etc. |
|
| Operation | Six LED digital tubes, two light-emitting diodes(LED), five bottoms
|
|
| Adaptive motor | 2.2KW～75KWAC servo motor | |
| Use Environment | Use place | Non-corrosive, flammable gas, prevent conductive objects, metal dust, oil mist and liquid from entering inside the drive unit. |
| Use Temperature Storage Temperature | Use temperature :0℃～+40℃，More than 40 ℃ shall be derated。
Storage temperature :-20℃～+60℃。 |
|
| Use humidity Storage humidity | Below 90% RH, non-condensing. | |
| Altitude | Below 1000m，Altitude above 1000m shall be derated。 | |
| Vibration / impact resistance | Vibration Resistance 4.9m/S2 ，Impact resistance 19.6m/S2 | |
Dimension:
The following figures show the installation dimensions of HSV-180AD series servo drives.
1.Figure 3-2 Dimension and size of HSV-180AD-, 035, 050, 075 (without auxiliary devices Unit: mm)
Figure 3-3 Dimension and size of HSV-180AD 035, 050, 075 (with auxiliary devices Unit: mm)
2、Figure 3-4 Dimension and size of HSV-180AD-,100, 150 (without auxiliary devices Unit: mm)
Figure 3-5 Dimension and size of HSV-180AD-100,150 (with auxiliary devices Unit: mm)
3、Figure 3-6 Dimension and size of HSV-180AD-,200, 300,450 (without auxiliary devices Unit: mm)
Figure 3-7 Dimension and size of HSV-180AD-,200, 300,450 (with auxiliary devices Unit: mm)
Download:
| Series | Model | Download |
| Servo Drive | HSV-180AD AC380V Servo Drive User Manual |  |
| Servo Drive | HSV-180AD Catalog | |
